Skip to content

Fast shipping throughout Europe!

Technical assistance

Assembly and installation

Use only adhesive weights inside the channel.

Remove the centering pins (pivots) fixed on the brake disc.

Apply a light amount of copper grease to the bearing hub and on the stop of the brake disc.

If you install spacers NON use the original bolts.

The bolts must be tightened by hand up to the rim stop.

Tighten the bolts with a torque wrench at 120Nm.

Fast shipping

Delivery in 24-48 hours.

Secure packaging

The guarantee of receiving the rims without damage.

Support 24/7

Assistant always at your disposal.